Posted in:
Date: 31 Oct 2017

Acoustigard Partition Rolls have been designed to provide long term thermal and acoustic control for internal partition wall and ceiling assemblies and offer a range of thicknesses and densities to suit most applications. This thermally tested and compliant insulation can confidently be used in ceilings and internal walls requiring New Zealand Building Code compliance.

Thermal compliance to AS/NZS4859.1, also ensures that Acoustigard Partition Rolls provide repeatable performance both thermally and acoustically. Acoustigard will not slump in the wall cavity, ensuring that there are no unwanted voids or cavities that can lead to the loss of thermal and acoustic performance.

Typical applications include walls and partitions in high rise and low rise multi residential buildings.

Features and Benefits

Posted in:
Date: 15 Oct 2014

Mammoth Skillion comes in two thicknesses; 115mm (R2.9) or 165mm (R3.2) depending on the climate zone and how much room has been specified for the ceiling cavity.

• • High performance semi-rigid 100% polyester sections.
  • Controlled loft to provided assured air-space to roof lining.
  • Self-supporting for a smooth friction fit without creases, folds or tucks.
  • Provides thermal and acoustic benefits for residential and commercial applications.
  • Mammoth products contain recycled polyester fibres. Skillion insulation uses up to 9,300 recycled plastic bottles per 100sqm*.
  • Easy and safe to install – simply squeezes between joists with no need for staples.
  • Safe and easy to work with, sections can easily be cut using wide blade craft knives or specialised insulation saws.
  • Mammoth sections come in pre-cut sections of varying widths and lengths.
  • Mammoth is moisture, mould and mildew resistant.
  • Heat bonded – no glues or binders that can break down so it won’t sag or settle over time.
  • Safe, non-itch, odourless and non-toxic – no precautions are required for handling the product.
  • Most Mammoth skillion sections are BRANZ Appraised 797.
  • NZ Green Building Council approved.
  • Mammoth products are made in a zero waste production process and are fully recyclable.
  • Recycling plastic protects the environment by keeping the carbon content locked up in the polyester fibre and reducing landfill waste.
  • Long lasting, Mammoth insulation is performance warranted for 50 years (T&Cs apply).
  • Manufactured by InZone Industries Ltd, NZ’s first and only Toitū net carbonzero certified insulation manufacturing organisation.

  * Calculations are based on 500ml PET Bottles (16.2g).

Technical Attributes	Standard	Test Result
New Zealand Building Code
Durability	Clause B2.3.1 a) 15 years Clause B2.3.1 b) 50 years	Ref: BRANZ Appraisal No 7971
Internal Moisture	Clause E3.3.1	Ref: BRANZ Appraisal No 7971
Hazardous Building Materials	Clause F2.3.1	Ref: BRANZ Appraisal No 7971
Energy Efficiency	Clause H1.3.1(a) Clause H1.3.2 E	Ref: BRANZ Appraisal No 7971
Product Safety
Non Toxic	OSH Health and Safety Guidelines2	Polyester products are ‘non-toxic’
Non Irritant	OSH Health and Safety Guidelines2	Polyester products are ‘non-irritant’
Respiratory Safe	n/a	Polyester fibres are non-respirable
Fire Test	ISO9705	Group1S (R3.2 sections only)
	AS/NZS60695.2.11	Passed – Glow wire flammability test
	AS/NZS60695.11.5	Passed – Test flames (Needle-flame test)
VOC Emission Safe 3	Total VOC ≤ 0.5mg/m3	< 0.005mg/m3 – level below detection4
	Formaldehyde ≤ 0.06mg/m3	< 0.009mg/m3 – level below detection
Glue Free		Free from all glues
Other
Non Corrosive	AS/NZS4859.1	Materials composed entirely of polyester are regarded as non-corrosive and are exempt from testing. Alkalinity of pH 7.8
Vermin Resistant		Not a food source for vermin (and not treated)

 

Posted in:
Date: 14 Oct 2014

Pads are semi-rigid polyester insulation that is friction fitted between studs. Mammoth air-lay wall sections are self-supporting and contribute to a superior installation without gaps, creases, folds or compression.

Blanket rolls are lofted polyester insulation that is stapled to the top dwang to fit snugly between wall studs.  Mammoth Wall Blanket insulation is available in R2.2 and R2.6.

Designed to work in conjunction with the building systems of existing and new homes, Mammoth Wall insulation provides effective, durable and reliable insulation that you can be assured works for at least 50 years*

Mammoth Wall Sections are available in R2.0 and R2.5 as well as specialised masonry wall sections.  Masonry wall insulation is a high density insulation for masonry lined homes within a frame or strapping system to increase thermal performance.

For full technical details download the datasheet below.

• Mammoth 100% polyester provides thermal and acoustic benefits for residential and commercial applications.
• Soft, roll-form insulation blanket for wall cavities to help absorb noise.
• Safe and easy to work with – can be torn to length or cut with shears.
• Available in varying widths and lengths to suit most applications.
• Mammoth wall blanket insulation uses up to 5,600 recycled plastic bottles per 100sqm*.
• Mammoth products are made in a zero waste production process and are fully recyclable.
• Secured by stapling within the wall cavity.
• Red List Free – no formaldehyde or pesticides added.
• Heat bonded – no glues or binders that can break down so it won’t sag or settle over time.
• Unaffected by moisture, Mammoth will continue to perform once dried out.
• Mammoth is moisture, mould and mildew resistant.
• Safe, non-itch, odourless and non-toxic – no precautions are required for handling the product.
• All Mammoth Wall Blankets are BRANZ 797 Appraised and have Environmental Choice certification.
• NZ Green Building Council approved.
• Long lasting, Mammoth insulation is performance warranted for 50 years (T&Cs apply).
• Mammoth wall insulation products have an Ozone Depleting Potential (ODP) of zero.
• Recycling plastic protects the environment by keeping the carbon content locked up in the polyester fibre and reducing landfill waste.
• Manufactured by InZone Industries Ltd, NZ’s first and only Toitū net carbonzero certified insulation manufacturing organisation.

* Calculations are based on 500ml PET Bottles (16.2g).

Posted in:
Date: 10 Oct 2014

Mammoth high performance acoustic sections manage sound in residential and commercial buildings.

Mammoth® acoustic wall sections (previously NOVAhush) manage sound around bathrooms, bedrooms, entertainments systems and offices. High performance acoustic wall sections, they are designed to reduce sound transmission at all frequencies and perform as an acoustic infill material by providing sound absorption within the cavity.

Mammoth products contain recycled polyester fibres. Mammoth acoustic wall section insulation uses up to 15,600 recycled plastic bottles per 100sqm*.

Mammoth’s acoustic range also includes Wall Blankets, Bafflestack for between floors, Panel Absorber and Duct Liner Insulation.

Technical Attributes	Standard	Test Result
Sound Absorption
Noise Reduction Coefficient	ASTM C423
	– 1000 g/m2	0.90
New Zealand Building Code	Clause B2.3.1 a) 15 years Clause B2.3.1 b) 50 years	Ref: BRANZ Appraisal No 797
Internal Moisture	Clause E3.3.1	Ref: BRANZ Appraisal No 797
Hazardous Building Materials	Clause F2.3.1	Ref: BRANZ Appraisal No 797
Energy Efficiency	Clause H1.3.1(a) Clause H1.3.2 E	Ref: BRANZ Appraisal No 797
Product Safety
Non Toxic	OSH Health and Safety Guidelines2	Polyester products are ‘non-toxic’
Non Irritant	OSH Health and Safety Guidelines2	Polyester products are ‘non-irritant’
Respiratory Safe	n/a	Polyester fibres are non-respirable
Fire Test	ISO9705	Group1S
	AS/NZS60695.2.11	Passed – Glow wire flammability test
	AS/NZS60695.11.5	Passed – Test flames (Needle-flame test)
VOC Emission Safe 3	Total VOC ≤ 0.5mg/m3	< 0.005mg/m3 – level below detection 4
	Formaldehyde ≤ 0.06mg/m3	< 0.009mg/m3 – level below detection
Glue Free		Free from all glues
Other
Non Corrosive	AS/NZS4859.1	Alkalinity of pH 7.8
Vermin Resistant		Not a food source for vermin (and not treated)

 

Posted in:
Date: 10 Oct 2014

Ceiling Blankets are the easiest and most effective form of  insulation. Like blankets, also made from polyester, Mammoth Ceiling blanket traps the warmth underneath to keep your property warmer. Easy and fast to install, it can be torn to length or cut with shears and simply laid over the ceiling framing.

• Soft, roll-form 100% polyester insulation blanket for ceilings. Can be double layered for higher R-value.
• Mammoth ceiling blanket insulation uses up to 7,400 recycled plastic bottles per 100sqm*. * Calculations based on 500ml PET Bottles (16.2g).
• Unaffected by moisture, Mammoth will continue to perform once dried out. Mammoth is moisture, mould and mildew resistant.
• Lightweight and easy to handle – can easily be torn to length or cut with shears. Available in varying widths and lengths to suit most applications.
• Heat bonded – no glues or binders that can break down so it won’t sag or settle over time.
• Red List Free – no formaldehyde or pesticides added.
• Safe, non-itch, odourless and non-toxic – no precautions are required for handling the product.
• All Mammoth ceiling blankets are BRANZ 797 Appraised.
• All Mammoth ceiling blankets have Environmental Choice certification.
• Mammoth products are made in a zero waste production process and are fully recyclable.
• Mammoth ceiling insulation products have an ODP of zero.
• Long lasting, Mammoth insulation is performance warranted for 50 years (T&Cs apply).
• Manufactured by InZone Industries Ltd, NZ’s first and only Toitū net carbonzero certified insulation manufacturing organisation.

 

Posted in:
Date: 10 Oct 2014

Mammoth® Panel Absorber is designed to be used as an interior surface lining in commercial or residential spaces to help reduce noise reverberation.

Mammoth® Panel Absorber acoustic insulation is a 100% polyester semi rigid board in white, white with black face, black or grey. With a Group 1S fire rating under the ISO 9705 Fire test, it is suitable for use in exit ways and a variety of occupied spaces and HVAC systems.

Mammoth Panel Absorber is available in various densities and thicknesses, ranging from 35-25mm, 35-50mm, 35-75mm, 20-100mm and 40-100mm and are 2400mm x 1200mm panel sizes. Custom cuts are available for larger projects with MOQ

Panel Absorber is suitable for use in most exposed applications, but is primarily designed for acoustic performance rather than a high visual finish as it may show some creasing, finish and colour variations.

• Mammoth Panel Absorber (previously NOVAhush) provides acoustic benefits for residential and commercial applications.
• High acoustic performance – up to NRC 1.05.
• Safe to use as an Interior surface liner – ISO 9705 Fire Test – Group 1S rating.
• Mammoth acoustic products reduce sound transmission at all frequencies.
• Safe, non-irritant, non-itch, odourless and non-toxic – no precautions are required for handling the product.
• Unaffected by moisture, Mammoth insulation will continue to perform once dried out.
• Mammoth is moisture, mould and mildew resistant.
• Heat bonded – no glues or binders that can break down so it won’t sag or settle over time.
• Lightweight and easy to handle – can easily be cut using wide blade craft knives or specialised insulation saws.
• Available in 4 colours, white, white with black face, black and grey. MOQ’s apply to some colours – please refer to the datasheet.
• Red List Free – no formaldehyde or pesticides added.
• NZ Green Building Council approved.
• Long lasting, Mammoth insulation is performance warranted for 50 years (T&Cs apply).
• Mammoth insulation products manufactured from 100% polyester have an Ozone Depleting Potential (ODP) of zero.
• Manufactured by InZone Industries Ltd, NZ’s first and only Toitū net carbonzero certified insulation manufacturing organisation.

Technical Attributes	Standard	Test Result
New Zealand Building Code
Durability	Clause B2.3.1 b) 50 years
Internal Moisture	Clause E3.3.1
Hazardous Building Materials	Clause F2.3.1
Product Safety
Non Toxic	OSH Health and Safety Guidelines1	Polyester products are ‘non-toxic’
Non Irritant	OSH Health and Safety Guidelines1	Polyester products are ‘non-irritant’
Respiratory Safe	n/a	Polyester fibres are non-respirable
Fire Test	ISO 9075	Group 1S (excludes Panel Absorber 40-100)
	AS/NZS60695.2.11	Passed – Glow wire flammability test
	AS/NZS60695.11.5	Passed – Test flames (Needle-flame test)
VOC Emission Safe3	Total VOC ≤ 0.5mg/m3	< 0.005mg/m3 – level below detection 2
	Formaldehyde ≤ 0.06mg/m3	< 0.009mg/m3 – level below detection
Glue Free		Free from all glues or chemical binders
Other
Non Corrosive	NZS 4222	Alkalinity of pH 7.8
Vermin Resistant	n/a	Not a food source for vermin (and not treated)

 

 

Posted in:
Date: 08 Oct 2014

• Mammoth Duct Liner is designed to absorb noise and thermally insulate HVAC ducts.

  The polyester liner ensures the reduction of sound transfer along the duct and that air of the desired temperature is delivered at the outlets. Mammoth® Duct Liner comes in a plain white sheet or a white sheet with a black face. Mammoth Duct Liner is a semi rigid board made in New Zealand from 100% thermally bonded polyester fibres. The polyester conjugate fibre used is crimped giving excellent durability.

  Mammoth’s acoustic range also includes Wall Sections, Wall Blankets, Bafflestack and Panel Absorber insulation.

• Mammoth Duct Liner (previously NOVAhush) is supplied plain and can have perforated foil or plain foil applied.
• Independent testing shows that Mammoth Duct Liner gives exceptional performance at the low end frequencies (125 – 500 Hertz).
• Absorbs fan drumming noise and reduces speech transference from room to room between air conditioning outlets.
• The thermal qualities eliminates the need to insulate the exterior of the ducting.
• Mammoth Duct Liner will not shed particles (fibre fall-out) or delaminate under high air flow velocities – ensuring the airstream remains clean.
• Assists in absorbing noise to create a quieter environment.
• The product is not conducive to fungal bacteria growth.
• Unaffected by moisture, Mammoth insulation will continue to perform once dried out.
• Mammoth is moisture, mould and mildew resistant.
• When installed to the manufacturer’s instructions it will remain in place ensuring the thermal effectiveness of the installed system.
• Safe, non-itch, odourless and non-toxic – no precautions are required for handling the product.
• Lightweight and easy to handle – can easily be cut using wide blade craft knives or specialised insulation saws.
• Heat bonded – no glues or binders that can break down so it won’t sag or settle over time.
• Red List Free – no formaldehyde or pesticides added.
• NZ Green Building Council approved.
• Long lasting, Mammoth insulation is performance warranted for 50 years (T&Cs apply).
• Mammoth 100% insulation products have an Ozone Depleting Potential (ODP) of zero.
• Mammoth products are made in a zero waste production process and are fully recyclable.
• Manufactured by InZone Industries Ltd, NZ’s first and only Toitū net carbonzero certified insulation manufacturing organisation.

Technical Attributes	Standard	Test Result
Fire Testing
Fire Test	ISO 9705	Group 1S
Product Safety
Non Toxic	OSH Health and Safety Guidelines1	Polyester products are ‘non-toxic’
Non Irritant	OSH Health and Safety Guidelines1	Polyester products are ‘non-irritant’
Respiratory Safe	n/a	Polyester fibres are non-respirable
	AS/NZS60695.2.11	Passed – Glow wire flammability test
	AS/NZS60695.11.5	Passed – Test flames (Needle-flame test)
VOC Emission Safe 2	Total VOC ≤ 0.5mg/m3	< 0.005mg/m3 – level below detection 4
	Formaldehyde ≤ 0.06mg/m3	< 0.009mg/m3 – level below detection
Glue Free		Free from all glues
Other
Non Corrosive	AS/NZS4859.1	Materials composed entirely of polyester are regarded as non-corrosive and are exempt from testing. Alkalinity of pH 7.8.
Vermin Resistant		Not a food source for vermin (and not treated)
Odourless	n/a	Mammoth™ is odourless and will not absorb odours
Water Vapour Sorption	ASTM C1104	0.3% – Water Vapour Sorption by weight
Antifungal Efficacy	ASTM G21-96 All samples incubated at 30 C for 28 day	Growth rate: 0 (Scale 0-4)

Posted in:
Date: 08 Oct 2014

Mammoth Bafflestack helps to create comfortable internal environments by improving sound insulation between spaces.

Mammoth® Bafflestack insulation is a roll form product made from 100% thermally bonded polyester fibres, designed to be stacked and compressed within the plenum space above partition walls, to the roof or floor above. This reduces sound intensity and transference between rooms, without the need for the construction of walls within the plenum space

Mammoth’s acoustic range also includes Wall Sections, Wall Blankets, Panel Absorber and Duct Liner Insulation.

• Using Mammoth Bafflestack (previously known as NOVAhush) will reduce sound intensity at all frequencies.
• Mammoth Bafflestack provides thermal and acoustic benefits for residential and commercial applications.
• 100% polyester acoustic insulation in a soft, roll-form to help absorb noise by reducing sound transmission at all frequencies.
• Mammoth Bafflestack reduces the need for any constructed cavity walls within a building.
• Mammoth Bafflestack blanket is laid over existing services in the ceiling cavity.
• Can be used in a single or double stack (see install instructions).
• Mammoth products contain recycled polyester fibres. Mammoth bafflestack insulation uses up to 3,700 recycled plastic bottles per 100sqm*.
• Lightweight and easy to handle – can easily be torn to length or cut with shears.
• Heat bonded – no glues or binders that can break down so it won’t sag or settle over time.
• Red List Free – no formaldehyde or pesticides added.
• Safe, non-itch, odourless and non-toxic – no precautions are required for handling the product.
• Unaffected by moisture, Mammoth insulation will continue to perform once dried out.
• Mammoth is moisture, mould and mildew resistant.
• Environmental Choice certified.
• NZ Green Building Council approved.
• Long lasting, Mammoth insulation is performance warranted for 50 years (T&Cs apply).
• Mammoth products are made in a zero waste production process and are fully recyclable.
• Recycling plastic protects the environment by keeping the carbon content locked up in the polyester fibre and reducing landfill waste.
• Mammoth 100% polyester Bafflestack insulation has an Ozone Depleting Potential (ODP) of zero.
• Manufactured by InZone Industries Ltd, NZ’s first and only Toitū net carbonzero certified insulation manufacturing organisation.

* Calculations are based on 500ml PET Bottles (16.2g).

 

Technical Attributes	Standard	Test Result
New Zealand Building Code
Durability	Clause B2.3.1 a) 15 years Clause B2.3.1 b) 50 years	Mammoth Bafflestack Blanket has been developed to meet the New Zealand Code requirements1
Internal Moisture	Clause E3.3.1
Hazardous Building Materials	Clause F2.3.1
Product Safety
Non Toxic	OSH Health and Safety Guidelines2	Polyester products are ‘non-toxic’
Non Irritant	OSH Health and Safety Guidelines2	Polyester products are ‘non-irritant’
Respiratory Safe	n/a	Polyester fibres are non-respirable
Fire Test	ISO9705	Group 1S
	AS/NZS60695.2.11	Passed – Glow wire flammability test
	AS/NZS60695.11.5	Passed – Test flames (Needle-flame test)
VOC Emission Safe 3	Total VOC ≤ 0.5mg/m3	< 0.005mg/m3 – level below detection4
	Formaldehyde ≤ 0.06mg/m3	< 0.009mg/m3 – level below detection
Glue Free		Free from all glues
Other
Non Corrosive	AS/NZS4859.1	Materials composed entirely of polyester are regarded as non-corrosive and are exempt from testing. Alkalinity of pH 7.8.
Moisture Resistant	ASTM C1104	0.3% by weight
Vermin Resistant	n/a	Not a food source for vermin (and not treated)
Odourless	n/a	Mammoth is odourless and will not absorb odours

 

Posted in:
Date: 10 Apr 2013

Quadzero™ is a high performance, foil-faced, mass-loaded vinyl noise barrier, offering superior acoustic transmission loss and low spread of flame surface covering.

Quadzero™ was developed to meet market noise reduction requirements in the domestic, commercial, industrial and OEM sectors.

To achieve this high performance, the Pyrotek engineering team developed Quadzero™ to be dense, thin, strong, tear-resistant and highly flexible. These properties give the product high transmission loss throughout the various weight ranges.It complies with British and international fire and building codes for low spread of flame.

Stiff lightweight panel constructions, such as plasterboard, drywall, plywood and hollow core walls, typically have coincidence dip resonance which allows noise to transmit through a construction. The coincidence dip is dependent on the material’s stiffness and thickness and occurs at the point where the sound transmitted through the structure matches the natural frequency of the panel.

Quadzero™ shifts the coincidence dip to frequencies limiting its impact, thereby maintaining the performance of the product. The thin, dense mass Quadzero™ barrier reflects and absorbs the transmission of sound through walls, ceilings and floors, reducing the critical frequencies generated from mechanical equipment, engine noise and electronic audio devices.

 

Detailed information is provided on product specific datasheets referenced below, and further technical information is available from the website www.www.pyroteknc.com

Posted in:
Date: 10 Apr 2013

Bradford Ultratel™ is designed as a high performance internal insulation on HVAC ductwork. It also has many applications as a general insulation product to enhance both thermal and acoustic performance.

Bradford Ultratel is manufactured from a rigid engineered glasswool insulation typically with an appropriate facing. The blanket is manufactured by spinning molten glass, containing up to 65% recycled content, into fine wool like fibres. These are bonded together using a thermosetting resin. The product can be identified by its golden appearance.

Features and Benefits

• High Performance
• Easily handled
• High compressive strength
• Resists damage
• Maximum performance at minimal thickness
• Helps meet the BCA Energy Efficiency provisions
• Easily forms the shape of the duct to be insulated
• Provides both Energy and cost savings
• Biosoluble material – safe to use
• Approved for use on site by Unions

Applications

Ultratel is designed to provide high performance internal insulation of heating, air conditioning and cooling ducted systems. Ultratel™ delivers superior sound absorption and attenuation due to its higher density and rigid properties. Ultratel™ comes in a range of thicknesses that meet the performance requirements as set out by the Building Code of Australia.

Typical HVAC applications include;

• Offices
• High rise
• Hospitals
• Shopping centres etc

Specifications

Blanket R-Value	Nom Thickness (mm)	Nom Length (m)	Nom Width (mm)	Pieces per pack	Nom Coverage per piece (m2)	Nom Coverage per pack (m2)	Nom Piece Weight (kg)	Nom Pack Weight (kg)
R0.8	25	10	1200	1	12.0	12.0	14.4	14.4
R0.8	25	10	1500	1	15.0	15.0	18.0	18.0
R0.8	25	2.4	1200	1	2.9	2.9	3.5	3.5
R1.2	38	10	1200	1	12.0	12.0	21.9	21.9
R1.2	38	10	1500	1	15.0	15.0	27.4	27.4
R1.5	50	7.5	1200	1	9.0	9.0	21.6	21.6
R1.5	50	7.5	1500	1	11.3	11.3	27.0	27.0
R1.5	50	2.4	1200	1	2.9	2.9	6.9	6.9
R2.3	75	2.4	1200	1	2.9	2.9	10.4	10.4

Posted in:
Date: 10 Apr 2013

Bradford Supertel™ is designed as internal insulation for HVAC ductwork. It also has many applications as a general insulation product to enhance both thermal and acoustic performance.

Bradford Supertel is manufactured from a resilient engineered glasswool insulation blanket typically with an appropriate facing. The blanket is manufactured by spinning molten glass, containing up to 65% recycled content, into fine wool like fibres. These are bonded together using a thermosetting resin. The product can be identified by its golden appearance.

Features and Benefits

• Lightweight
• Easily handled
• High tensile strength
• Resists damage
• Maximum performance at minimal thickness
• Helps meet the NZ Building Code energy efficiency provisions
• Provides both energy and cost savings
• Biosoluble material – safe to use
• Made from up to 65% recycled material

Applications

Supertel™ has been designed as a thermal and acoustic internal lining for all air conditioning duct work or may be used for other thermal and acoustic applications where high insulation performance is required at minimal thickness. Supertel™ comes in a range of thicknesses that meet the performance requirements as set out by the NZ Building Code.

Typical HVAC applications include:

• Offices
• High rise
• Hospitals
• Shopping centres etc

Specifications

Blanket R-Value	Nominal Thickness (mm)	Nominal Length (m)	Nominal Width (mm)	Pieces per pack	Nominal Coverage per piece (m2)	Nominal Coverage per pack (m2)	Nominal Piece Weight (kg)	Nominal Pack Weight (kg)
0.3	13	2.4	1200	16	2.9	46.1	1.2	19.2
0.7	25	15	1200	1	18	18	14.4	14.4
0.7	25	15	1500	1	22.5	22.5	18	18
0.7	25	2.4	1200	10	2.9	28.8	2.3	23
0.7	25	2.4	1500	10	3.6	36	2.9	28.8
1.2	40	15	1200	1	18	18	21.9	21.9
1.2	40	10	1500	1	15	15	18.2	18.2
1.2	40	2.4	1200	6	2.9	17.3	3.5	21
1.2	40	2.4	1500	6	3.6	21.6	4.4	26.3
1.5	50	10	1200	1	12	12	19.2	19.2
1.5	50	10	1500	1	15	15	24	24.0
1.5	50	2.4	1200	5	2.9	14.4	4.6	23.0
1.5	50	2.4	1500	5	3.6	18	5.8	28.8
2.2	75	7.5	1200	1	9.0	9	21.6	21.6
2.2	75	2.4	1200	3	2.9	8.6	6.9	20.7
2.2	75	2.4	1500	2	3.6	7.2	8.6	17.3
3.0	100	2.4	1200	2	2.9	5.8	9.2	18.4
3.0	100	2.4	1500	2	3.6		11.5	23.0

 

Posted in:
Date: 10 Apr 2013

Bradford Gold wall insulation is a resilient and compressible insulation manufactured from the controlled felting of glasswool bonded with a thermosetting resin. It has been engineered to provide the highest levels of thermal performance available while reducing unwanted noise.

The products can boast of R-Values of R5.0 and R6.0. When you select and fit Bradford Gold High Performance for your project, you can rest assured that you will be helping to create the best possible environment for your customers, whilst providing optimal energy savings too.

Posted in:
Date: 07 Apr 2013

Potters supplies a range of rockwool products specifically designed for applications up to 820^oC. These products are used to insulate tanks, vessels and larger process equipment from energy loss and to provide personnel protection. Products are generally selected by the temperature of the application.

Fibertex 350

Bradford Fibertex 350 a lightweight medium density rockwool insulation product designed for applications up to 350˚C.

Fibertex 450

Bradford Fibertex 450 is a general purpose industrial insulation for use on process equipment, vessels, tanks and reactors. It is a medium duty thermal and acoustic insulation suitable for continuous operation up to 450^oC.

Fibertex 650

Bradford Fibertex 650 is a general purpose industrial insulation for use on process equipment, vessels, tanks and reactors. It is a heavy duty thermal and acoustic insulation suitable for continuous operation up to 650^oC.

Fibertex 820

Bradford Fibertex 820 is a specialty purpose industrial insulation for use on high temperature furnace and hydrocracker insulation as well as for use in marine and building application for fire protection. It is a heavy duty thermal and acoustic insulation suitable for continuous operation up to 820^oC and exhibits minimal shrinkage.

 

Detailed Building Product Information Datasheets Are Available from www.bradfordinsulation.co.nz

Posted in:
Date: 07 Apr 2013

Bradford Fibermesh is a general purpose industrial insulation for use on process equipment, vessels, tanks and reactors. It has a stitched Stainless Steel mesh that allows it to fit to irregular shaped surfaces. It is a light duty thermal and acoustic insulation –  suitable for continuous operation up to 350°C, 450°C and 650°C.

Bradford Fibermesh Rockwool is a lightweight medium density insulation product stitched on one side with a 25mm stainless steel wire mesh. Fibermesh is manufactured from spinning a molten mixture of natural rock and recycled products into fine wool like fibers. The inorganic fibres are bonded together using a thermosetting resin and the mesh is then stitched to the base Rockwool to form the final product. The product can be identified by its dark green/brown appearance.

Features and Benefits

• Lightweight highly durable insulation product
• Easily forms and holds shape of equipment to be insulated
• Excellent and Cost effective Thermal insulation
• Performance is not adversely effected from contact with water
• Non combustible
• Biosoluble safe to use product

Applications

Fibermesh is available in three different specifications and to be used in applications where operating temperatures do not exceed either 350°C, 450°C or 650°C .
The Mesh facing provides additional strength and flexibility allowing the product to form and hold form around process equipment, ductwork and large diameter piping.

Typical applications include:

• storage tanks
• heat exchangers
• reactors
• precipitators
• stacks
• ovens
• air conditioning ductwork
• refrigeration equipment and large diameter piping.

Bradford Fibermesh is easily installed by impaling the batts or blankets on weld pins and securing with speed clips. The mesh joins may be laced together for extra strength if required.

Specifications

Thickness (mm)	Length (mm)	Width (mm)	Pieces per pack	Nominal m2 per pack
50	5000	600	1	3.0
75	3000	600	1	1.8
100	2000	600	1	1.2

 

Detailed Building Product Information Datasheets Are Available from www.bradfordinsulation.co.nz