Posted in:
Date: 02 Oct 2016

A fire-rated coated for sealing of BOSS Batts and penetrations
Approved to AS1530.4:2005 and EN1366

Key benefits:

• Life expectancy of over 25 years
• Can be spray, brush or trowel applied
• Suitable for indoor use without additional environmental protection
• Fire Resistant testing to AS1530.4 to 4 hrs and EN1366-3 to 240mins
• Tested in block wall, concrete, masonry, plasterboard partition, composite panel, durasteel wall & speed panel

Ablative Coating has been developed to seal BOSS Batts once installed in apertures. Once the Ablative Coating is applied it prevents the passage of fire and smoke between fire rated compartments, giving up to 4 hour fire resistance in blank openings and around metallic pipes, cables, cable trays, HVAC ducts and dampers. BOSS Ablative Coating is tested and approved to AS1530.4, AS4072.1 and BS/EN1366.3.

Ablative Coating is a water based acrylic coating, having excellent fire and electrometric properties. At normal temperatures, it remains flexible to permit thermal and mechanical movement of the services. The product is unaffected by oil, fungus, moisture, vermin, contain no halogens or asbestos and contains no VOCs.

 

Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au

Posted in:
Date: 02 Oct 2016

BOSS Fire’s Bulkhead Batt is designed to provide simple and effective compartmentalisation and fire stopping in walls and floors.

It consists of high-density mineral fibre batt with an ablative fire resistant coating which can be used in conjuction with other high performance BOSS fire protection products to provide excellent thermal and acoustic insulation. The Bulkhead Batt prevents the passage of fire and smoke between compartment walls and floors whilst still allowing the insulation of services.

At normal temperatures, the Bulkhead Batt installed with FireMastic-300® fire rated sealant remains flexible enough to permit thermal and mechanical movement of services. Both products are unaffected by oil, fungus, moisture and contain no halogens or asbestos.

Key benefits

• Up to 56.1dB sound reduction
• Low cost & highly efficient method of fire stopping
• Provides up to 4 hours fire and smoke barrier
• Long life and easy storage
• Suitable for large openings in floors and walls
• One of the most simple and cost effective method of fire stopping
• Approved to AS1530.4(2005)

Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au

Posted in:
Date: 02 Oct 2016

With today’s rigorous standards in fire safety for residential and commercial buildings, BOSS Fire & Safety offer the perfect solution for maintaining the integrity of Fire Rated ceiling when using downlights.

Traditionally, the installation of downlights means the ceiling’s fire rating would be compromised, and the previous options that exist to maintain the fire rating have been less than satisfactory. Many products on the market are known as ‘heat resistant’ which is not a compliant Fire Rated solution, or are approved only to foreign codes such as British Standard.

BOSS Fire & Safety now offer an effective and low-cost solution, specifically for downlights, that is approved for up to 2-hours Fire Rating. The Fire Rated Downlight Cover is an intumescent hood that is installed on top of the downlight to provide 2hr protection to the ceiling.

Key benefits

• 2 hours fire rating to AS 1530.4
• Fast and simple installation
• Cost effective
• Installed from below or above the ceiling
• No electrician required
• Excellent thermal and acoustic properties

Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au

Posted in:
Date: 02 Oct 2016

Flexible fire and acoustic rated acrylic intumescent sealant. Suitable for sealing joints, linear gaps and service penetrations. Our 5 hour fire rated sealant offers the best fire rating of all acrylic and PU sealants on the market, offering maximum protection from fire and smoke in both integrity and insulation.
With an FRL of up to -/300/300, FireMastic-300™ is unrivalled.

As an acrylic emulsion, FireMastic-300™ is simple to use and cleans up easily in water.

Key benefits

• 5 hours industry leading mastic offering up to FRL of -/300/300
• Acoustic reduction up to 67dB
• Used for sealing linear gaps and around service penetrations such as ducts, dampers, cables and metallic pipes
• Certified for use in concrete, plasterboard, masonry, AAC, Hebel, Speedpanel, Korok, AFS, Shaftliner, Dincel and timber installations
• Approved to AS1530.4(2014), AS4072.1 and BS EN1366
• Highly flexible, up to 40% movement
• High yield so installation material costs and labour are both decreased
• Gap widths up to 50mm
• Available in standard colours of grey and white, other colours available upon request
• Widely adaptable to seal around other passive fire products such as dampers, pillows, collars and batts
• Can be painted once cured

Installation

• Ensure that the gap, aperture and/or services in question are tested with BOSS FireMastic-300™ and the site conditions are within the application specification.
• Ensure all surfaces are clean, dry and free from grease.
• Use masking tape to provide straight edges around surfaces, if required for aesthetics.
• Please refer over page under backing rod to determine of a backing rod is required.
• Cut nozzle to required bead size and apply to substrate via a caulking gun. Smooth out sealant with a wet spatula within 5 minutes for professional finish.
• Clean tools immediately after use with water.
• Tack dry within 30mins, cures 3mm per 24hrs.­

Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au