Posted in:
Date: 02 Oct 2016

FireMastic-HPE™ is a high pressure exerting fire sealant to surpass all other sealants. Our flagship sealant is tested and approved to change the way firestopping is applied to pipes and penetrations.

Approved to AS1530.4 and EN1366 and offers an FRL of up to -/120/120 in a wide range of penetration systems, outperforming other leading sealants in independent fire tests.

FireMastic-HPE is a graphite-based, thixotropic, one-part acrylic emulsion that is designed to resist the passage of fire and smoke. Under heat, FireMastic-HPE will expand with enough pressure to close PVC pipes and seal around cables and metal pipes to maintain the integrity and insulation performance of the seal, yet without placing any unnecessary pressure on the building substrate.

FireMastic-HPE is supplied in cartridges suitable for caulking via an applicator gun or also available in buckets. It has excellent non-slump properties coupled with the ease of application due to its water-based nature.

The sealant is intended for use in either linear gap seals or services penetrations through walls where fire integrity and insulation needs to be preserved. Under fire conditions the product expands up to 40 times its volume and exerts pressure to the surrounding substrates leading to closure of the penetration. The integrity and insulation is then maintained by the stability of the remaining product char.

Key benefits

• 2 hours fire rating on cables and pipes
• Closes plastic pipes in a fire up to 80mm diameter
• Market leading solutions for Paircoil Bundles
• Replaces fire collars on pipes of cPVC, & uPVC
• Closes and seals PEX water pipes, PEX-AL Gas Pipes
• Seals around lagged copper pipes
• Seals around power and data cables and large cable bundles
• Paircoil bundles including Paircoil, uPVC drain pipe, comms and power cables and other HVAC clusters

Approved in a wide variety of wall and floor substrates

• 60min, 90min & 120min FR Plasterboard Wall & Ceiling Systems
• Concrete Walls
• Solid and Hollow Masonry Walls
• Speedpanel Walls
• AAC / Hebel Walls
• Concrete Floor Slabs

Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au

Posted in:
Date: 02 Oct 2016

BOSS MaxiCollars set new standards in the use of retrofit pipe collars. With a unique design and advanced intumescent technology, MaxiCollars provide one of the highest expansion rates available on pipe collars, providing maximum seal protection against fire and smoke.

Coupled with a unique profile of only 40mm depth, MaxiCollars are the best choice for tight fitting areas or closely installed pipes.

Suited to both walls and floors, MaxiCollars can be installed on the following structures:

• BOSS Batt mineral fibre boards
• Speedpanel – with no need for additional plasterboard build up
• Plasterboard and other drywalls
• Masonry and Block
• Hebel
• Concrete

Key benefits:

• Maximum Performance – up to 4hrs fire rated
• Sizes available from 32mm – 250mm diameter
• Only 40mm deep allows use in tight areas
• Tested to AS1530.4, AS4072.1 and EN1366

Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au

Posted in:
Date: 02 Oct 2016

PYROGARD Expanding Fire Foam is fire-rated for up to 4 hours and approved to AS1530.4(2005). Its high performance design means it is ideal for sealing irregular shaped gaps, voids and linear joints, such as gaps around door frames, between slab joints or between different wall materials.

Ideal uses

• Filling window and door gaps
• Backfilling around service penetrations
• Filling obscure-shaped or awkward gaps where linear FR methods are not suitable

Features

• Fire rating up to 4 hours (FRL -/240/240)
• Excellent adhesion to common building substrates
• Once cured the foam can be cut, sawn, painted or plastered
• Expands up to 40 times its original volume
• Coloured pink to identify its fire rating properties.

Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au