MENU
We produce a wide range of Top Hats for a variety of uses including internally or externally and on vertical fascias and soffits. Top Hats are often used where there is a higher wind loading or where heavy duty sheeting is to be installed.
Our Top Hats come in both medium gauge (0.75bmt) and heavy gauge (1.15bmt), two different face widths, 50mm and 75mm, and four different depths, 15mm, 25mm, 35mm, and 50mm. Each Top Hat is manufactured from G200 Z275 Gal Steel.
We also produce a range of complementary fixing cleats that enable the adjustable fixing of Top Hats to steel or masonry/concrete substrates as well as to steel stud framing, allowing for plumb or leveling of the cleat to the structure and of the Top Hat onto the cleat as shown in the Design Manual.
Some facade systems require the installation of Top Hats vertically and there will be occassions where steel studs do not coincide with the Top Hat spacing requirement. When that is the case, it may be neccessary to install Top Hats onto the steel Nogging Track.
For Top Section Dimensions, Serviceability Limit State Load Tables and Ultimate Limit State Load Tables, click here.
We supply Reveal Beads in a variety of widths that offer a strong, straight and clean finish to window openings that require internal trimming.
Our Reveal Beads are cold rolled from 0.9mm Zincanneal steel and are able to withstand harsh UV rays without cracking or breaking down. They incorporate a perforated leg for setting into the surrounding wall lining and can be painted over to match the wall finish.
We have a range of Steel Angles available, including heavy duty and slotted angles.
Heavy Duty Steel Angles suit both lightweight autoclaved aerated concrete panel systems (AAC) and steel framing requirements for facade systems. They can be used to strengthen internal corners of façade systems, in the construction of bulkhead framing or in a variety of situations requiring bracing or stiffening.
Our Slotted Steel Angles can be used for head and base fixing for AAC panel systems.
We also produce ‘C’ Channel components that are designed for use with Speedpanel products and also offer Double-punched Nogging Track that is suitable for back-to-back configurations for Rondo Steel Stud or MAXIjamb®.
Detailed Building Product Information Datasheets Are Available from www.rondo.co.nz
© Potter Interior Systems 2024