MENU
As a cost-effective alternative to pipe collars, BOSS Fire provide an intumescent Pipe Wrap to provide a high-expansion pressure seal penetrations of various plastics and polymers.
Ranging up to 160mm pipe diameter, Pipe Wraps are suitable for a variety of materials:
Standard pipe wrap offers 2 hour fire rating. A 4 hour fire rated pipe wrap is available upon request.
Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au
Posted in:The BOSS FyreBox is revolutionising firestopping methods for large bundles of mixed services. Designed to allow large bundles of pipes and cables to all pass through one single fire rated enclosure, the Fire Transit Box is the only tested and proven method of firestopping multiple services with such simplicity of installation and ease of compliance. Commonly used for apartment entry configurations above an entry door to an SOU, the Fire Box is also suited for service risers, shafts, plant areas and data rooms in a variety of residential, commercial and industrial buildings.
The new generation of BOSS FyreBox is now tested and approved to AS1530.4: 2014 and AS4072.1-2005 for 30, 60, 90 and 120 minute configurations on a larger variety of services than ever before. New approvals relate to a wider variety of wall, concrete slab & floor / ceiling systems.
The BOSS FyreBox allows you to group various electrical, plumbing, HVAC+R services all through one easy to use and easily certified box. Because services trades don’t need to treat their services individually, risk is removed from using incorrect products or not having them installed correctly.
Easily fixed to the underside of concrete soffit before walls are built, or be installed into the wall during construction in a mid wall mount scenario. A range of fixing methods are available including retrofit options using equal angles. Recent additions to the range include retrofit options to concrete floor slabs and also ceiling approvals.
Once the box is installed, services simply “pass through” the box. There is no need to core individual penetrations for each service, or cutting any inserts, nor do you need to seal or treat every individual service. The unique Brush Seal allows services to be passed through the box at any time of construction, or even later after a project has been completed making it easier than ever for maintenance contractors and building managers to maintain fire compliance once the building is occupied.
The BOSS FyreBox contains an advanced high pressure intumescent internally that upon getting exposed to high temperatures, expands to create a superior performing fire seal. Coupled with the unique Brush Seal that is designed to make the installation and compliance simple, ultimately leading to an industry-leading level of protection.
Suitable for various projects and applications:
Certified services include:
Certified substrates include:
Please check the relevant fire certification to ensure the services, substrates and configurations meet your fire rating requirements.
For more information call our Technical Services team to discuss your project requirements.
Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au
Posted in:BOSS Retrofit Fire Collars prevent the spread of fire where PVC and PE plumbing pipes penetrate concrete fire walls and floors. Also for use on PP-R pipes, and polybutylene pipes.
Boss Fire Collars are suitable for on walls and floors. With the addition of the optional ‘click on’ flange oversize holes may be accommodated.
Unlike intumescent assisted mechanical damper type fire collars, Boss Fire Collars contain no fusible links or moving parts to require servicing. As the fire stopping intumescent material in our product is around the outside of the uninterrupted pipe it does not affect the performance of the pipe.
Key benefits
Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au
Posted in:Flexible fire and acoustic rated acrylic intumescent sealant. Suitable for sealing joints, linear gaps and service penetrations. Our 5 hour fire rated sealant offers the best fire rating of all acrylic and PU sealants on the market, offering maximum protection from fire and smoke in both integrity and insulation.
With an FRL of up to -/300/300, FireMastic-300™ is unrivalled.
As an acrylic emulsion, FireMastic-300™ is simple to use and cleans up easily in water.
Key benefits
Installation
Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au
Posted in:FireMastic-HPE™ is a high pressure exerting fire sealant to surpass all other sealants. Our flagship sealant is tested and approved to change the way firestopping is applied to pipes and penetrations.
Approved to AS1530.4 and EN1366 and offers an FRL of up to -/120/120 in a wide range of penetration systems, outperforming other leading sealants in independent fire tests.
FireMastic-HPE is a graphite-based, thixotropic, one-part acrylic emulsion that is designed to resist the passage of fire and smoke. Under heat, FireMastic-HPE will expand with enough pressure to close PVC pipes and seal around cables and metal pipes to maintain the integrity and insulation performance of the seal, yet without placing any unnecessary pressure on the building substrate.
FireMastic-HPE is supplied in cartridges suitable for caulking via an applicator gun or also available in buckets. It has excellent non-slump properties coupled with the ease of application due to its water-based nature.
The sealant is intended for use in either linear gap seals or services penetrations through walls where fire integrity and insulation needs to be preserved. Under fire conditions the product expands up to 40 times its volume and exerts pressure to the surrounding substrates leading to closure of the penetration. The integrity and insulation is then maintained by the stability of the remaining product char.
Key benefits
Approved in a wide variety of wall and floor substrates
Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au
Posted in:BOSS Fire & Safety’s range of FirePillow-240 covers all applications. Fire Pillows are the most common – treated fabric bags containing fire retardant granulated rockwool, securing penetrations in fire rated construction against the passage of smoke and the spread of fire. They are best suited to environments where pipes, telecommunications cables, cable trays and service shafts penetrate a fire-rated wall or floor.
BOSS also supply High Performance FirePillows and Intumescent FirePillows for environments where water, oil, chemicals and greater protection are required.
Key benefits
Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au
Posted in:BOSS MaxiCollars set new standards in the use of retrofit pipe collars. With a unique design and advanced intumescent technology, MaxiCollars provide one of the highest expansion rates available on pipe collars, providing maximum seal protection against fire and smoke.
Coupled with a unique profile of only 40mm depth, MaxiCollars are the best choice for tight fitting areas or closely installed pipes.
Suited to both walls and floors, MaxiCollars can be installed on the following structures:
Key benefits:
Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au
Posted in:PYROGARD Expanding Fire Foam is fire-rated for up to 4 hours and approved to AS1530.4(2005). Its high performance design means it is ideal for sealing irregular shaped gaps, voids and linear joints, such as gaps around door frames, between slab joints or between different wall materials.
Ideal uses
Features
Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au
Posted in:The BOSS Thermal Defence System has been developed to prevent the passage of fire and smoke between fire rated compartments where service penetrations exist, such as cables, cable trays and pipe work.
The BOSS Thermal Defence System consists of 2 elements:
1. Thermal Defence Wrap (TDW) installed around the penetrating services,
2. And an aperture seal of either BOSS FireMortar & Bulkhead Batts or BOSS S-line FirePillows for the wall apertures.
The TDW is designed to allow movement within the services, maintain necessary insulation on services and prevent temperature rise of services throughout a fire. At normal temperatures, the TDW remains flexible to permit thermal and mechanical movement of the pipes and cables.
Thermal Defence Wrap is a sheathed woven intumescent technology of bio-soluble vitreous material, graphite and flexible organic binders. It will activate in a fire to expand
Key benefits
Detailed Building Product Information Datasheets Are Available from www.bossfire.com.au
© Potter Interior Systems 2024